Misplaced Pages

Thin small outline package

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from Thin Small Outline Package) Thin surface mount IC package Not to be confused with Thin shrink small outline package (TSSOP).
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Thin small outline package" – news · newspapers · books · scholar · JSTOR (July 2007) (Learn how and when to remove this message)
An outline drawing of a Type I TSOP with 32 leads

Thin small outline package (TSOP) is a type of surface mount IC package. They are very low-profile (about 1mm) and have tight lead spacing (as low as 0.5mm).

They are frequently used for RAM or Flash memory ICs due to their high pin count and small volume. In some applications, they are being supplanted by ball grid array packages which can achieve even higher densities. The prime application for this technology is memory. SRAM, flash memory, FSRAM and E2PROM manufacturers find this package well suited to their end-use products. It answers the needs required by telecom, cellular, memory modules, PC cards (PCMCIA cards), wireless, netbooks and countless other product applications.

TSOP is the smallest leaded form factor for flash memory.


History

The TSOP package was developed to fit the reduced package height available in a PCMCIA PC Card.

Physical properties

TSOP48 type I: Silicon Storage Technology 39F1601
TSOP54 type 2 Winbond W982516BH75L

TSOPs are rectangular in shape and come in two varieties: Type I and Type II. Type I ICs have the pins on the shorter side and Type II have the pins on the longer side. The table below shows basic measurements for common TSOP packages.

Type I

Part number Pins Body width (mm) Body length (mm) Lead pitch (mm)
TSOP28 28 8.1 11.8 0.55
TSOP28/32 28/32 8 18.4 0.5
TSOP40 40 10 18.4 0.5
TSOP48 48 12 18.4 0.5
TSOP56 56 14 18.4 0.5

Type II

Part number Pins Body width (mm) Body length (mm) Lead pitch (mm)
TSOP6 (SOT457) 6 1.5 2.9 0.95
TSOP20/24/26 20/24/26 7.6 17.14 1.27
TSOP24/28 24/28 10.16 18.41 1.27
TSOP32 32 10.16 20.95 1.27
TSOP40/44 40/44 10.16 18.42 0.8
TSOP50 50 10.16 20.95 0.8
TSOP54 54 10.16 22.22 0.8
TSOP66 66 10.16 22.22 0.65

HTSOP

HTSOP (Heatsink TSOP) is a variant of TSOP with an exposed pad on the bottom side. The pad is soldered to the PCB to transfer heat from the package to the PCB.

Similar packages

There are a variety of small form-factor IC carrier available other than TSOPs

See also

References

  1. Intel (1999). "Small Outline Package Guide" (PDF). p. 1-1. Archived from the original (PDF) on February 11, 2017. Retrieved December 17, 2021.
  2. Texas Instruments. "Recent Advancements in Bus-Interface Packaging and Processing". 1997. p. 2
  3. SiliconFarEast: "TSOP - Thin Small Outline Package"
  4. "Sc-74; Tsop6 (Sot457)".

External links

Semiconductor packages
Single diode
  • DO-201 (DO-27)
  • DO-204 (DO-7 / DO-26 / DO-35 / DO-41)
  • DO-213 (MELF / SOD-80 / LL34)
  • DO-214 (SMA / SMB / SMC)
  • SOD (SOD-123 / SOD-323 / SOD-523 / SOD-923)
3...5-pin
Single row
Dual row
Quad row
Grid array
Wafer
Related topics
It is relatively common to find packages that contain other components than their designated ones, such as diodes or voltage regulators in transistor packages, etc.
Category: